Common hearing aid failure, learn to check it yourself

Common hearing aid failure, learn to check it yourself

For the hearing impaired, hearing aids have become an indispensable tool in daily life. What should we do if there is a problem with the hearing aid? Now let’s teach you some troubleshooting tips for common problems with hearing aids.

Sound intermittent

1The sound is intermittent due to unstable battery voltage.

Solution: The imported battery voltage is stable, please replace it with a new imported battery. Tear the membrane on the new battery and place it on the table3-5After a minute, put it in the battery compartment of the hearing aid.

2Sound discontinuity caused by corrosion or looseness of the battery reed.

Solution: Wipe the battery reed with alcohol cotton and use tweezers to adjust the reed position so that the reed can clamp the battery. If you are unable to handle it yourself, please go to the fitting center for consultation.

3The box machine may be caused by sound breakage caused by wire damage.

Solution: Go to the fitting center and replace a new one.

Howling

1The whistling caused by the standard earplugs not applicable.

Solution: Go to the hearing aid matching center to replace the earbuds of the appropriate size. If not applicable, optional ear molds are available.

2The whistling caused by the excessive vent of the ear mold.

Solution: Go to the Matching Center and let the fitter put a proper amount of cotton barrier or sponge in the vent to reduce the leakage of audio energy from the vent.

3Whistling due to incorrect wearing

Solution: Remove the hearing aid and re-wear it. When you wear it, pull down the earlobe. At the same time, put the hearing aid, ear mold or earplug into the external auditory canal, and wear it with the mirror.

silent

1The hearing aid is silent due to lack of electricity in the battery

Solution: Please replace a new battery. Tear the membrane on the new battery and place it on the table3-5After a minute, put it in the battery compartment of the hearing aid.

2Hearing aid due to water drops in the ear hook or sound tube

Solution: Remove the sound tube from the hearing aid, pour out the water droplets in the ear hooks and the water drops in the sound tube, and then dry them in an electronic drying box. If you cannot solve it yourself, please go to the Matching Center.

3The hearing aid is silent due to the ear mold or the custom machine’s sound port blocking

Solution: Use the cleaning brush in the hearing aid box to clean the ear mold and custom machine outlet. If the blockage is serious and cannot be solved by yourself, please go to the optional center for cleaning or maintenance.

4Silence due to blockage or moisture in the microphone port

Solution: Please clean the microphone mouth with a cleaning brush and then dry it in an electronic drying box. If it is still silent, please consult the Matching Center.

Attenuated sound

1The sound is weak due to insufficient battery power.

Solution: Please replace a new battery. Tear the membrane on the new battery and place it on the table3-5After a minute, put it in the battery compartment of the hearing aid.

2The sound caused by the blockage of the earplug or the ear mold by foreign matter is weak.

Solution: Please use the cleaning brush in the hearing aid box to remove the foreign objects in the earplug or ear mold, and then check the earbeat sound tube and ear hook for water drops. If so, please unplug the sound tube and put the water The beads are removed and dried.

3The sound is weak due to the blockage of the microphone port by foreign matter.

Solution: Please clean the microphone mouth with a cleaning brush and then dry it in an electronic drying box. If it is still silent, please consult the Matching Center.

4As your hearing loss, you will feel the hearing aid sounds smaller.

Solution: Please go to the hearing aid fitting center to review the hearing, and if there is a drop, re-commission or fit the hearing aid.

If the above method can not be solved, you need to go to the hearing aid matching center to ask the professional to check and deal with it.