Some tips on using hearing aids

Some tips on using hearing aids

1. The earphone in the hearing aid is located at the front end of the hearing aid. It transmits the amplified sound to the patient’s ears through a half moon shaped bend. It plays a key role in the hearing aid. At the same time, it is a device that is most afraid of falling and shaking. When it falls vertically in 1.5m debugging, it can break the earphone, which will affect the sensitivity of the coil in the machine, the distortion of listening and speaking, the change of tone and the effect of hearing aid. Therefore, the user should install the earphone on the cushion to prevent the earphone from being damaged by falling when he loses his hand.

2. Hearing aid is composed of electronic components. It is easy to rust when rotating in high humidity environment. When the hearing aid is not used, it should be put into a closed small box (such as empty medicine box), and then put two bags of desiccant or quicklime materials in the box. Although it is a little troublesome, it is more important for the service life of the hearing aid, especially in high humidity and hot areas. Ear mold should be cleaned regularly (about 15 days), and then dried with neutral detergent, which can remove dirt and moisture.

3. Hearing aid is a kind of precision equipment, which may cause damage under high temperature for a long time (such as exposure to the sun for a long time, close to the stove, etc.), so it must be prevented.

4. Don’t let cats, dogs and other pets get close, so as to avoid teasing or eating hearing aids.

5. When the hearing aid is not in use, the battery shall not be placed in the hearing aid for a long time (more than two days), so as to prevent the battery from leaking liquid and make the hearing aid corroded and rusted.

(13) in case of any failure of hearing aid, it shall be repaired by professional manufacturer and maintenance point in time. Generally, it is not allowed to start and repair the hearing aid by itself, so as to avoid damaging the components inside the hearing aid.

⒎ there are several buttons that can be debugged for hearing aids. In addition to volume adjustment and switch adjustment, other buttons, such as maximum output button and volume button, should be debugged by professionals. They can be used according to the prescription of hearing aids issued by professionals, with the best effect.

Jinghao hearing aid reminder: hearing aid wearing requires professional “matching”, so it is very important to choose a professional hearing aid matching center and a hearing aid tester! If you have any hearing problems, you can call Jinghao for consultation, or come to the matching center for experience. Hearing aid free consultation Tel.: + 86-18566295705